Pliers and mass clamps/h1>

Usestrong>quality pliers and clamps for mass/strong> is of great importance for the quality of the weld. Without proper grounding, the voltage does not produce enough heat for proper welding, and there is a possibility of damaging the welding machine as well as the cable. Several methods are used: you can ground the cable on the workbench, connect directly to the workpiece or screw, etc.

>FOR SALE CLAMP FOR MASS

Ground clamp magnetic 600 A

€18.50

These clamps have built-in magnets that allow them to be attached to metal surfaces.
- 600A

Rotating mass clamp ECR1500G60

€262.07

- 1500 A
- for EPP welding process
- cable acceptance: 120 mm2
- swivel connection

Ground clamp rotating 800 A

€229.80

ECR 800

- suitable for EPP welding process
- intended for connecting a double cable with a large section
- cable cross-section: 95mm2
- swivel connection

Ground clamp magnetic 400 A

Send an inquiry

These clamps have built-in magnets that allow them to be attached to metal surfaces.
-400A
-max. cable section: 70mm2

Ground clamp CLMP 402

€13.14

- max. acceptance: 50mm
C ground clamps are used in welding to establish a solid electrical connection between the part being welded and the ground or ground of the welding machine.>

Ground clamp rotating 500 A

€41.95

ECR 500
500 A.
cable section: 70mm2
swivel connection

Offer:

ECCR models have a copper braid

ECCR models - cable connection via nut

Rotating clamps for the EPP procedure/p>