Electrode holders
The electrode holder is a clamping device for holding the electrode , safely, in any position. The welding cable is connected to the holder through a hollow insulated handle. The design of the electrode holder allows quick and easy replacement of the electrode.
ELECTRODE HOLDERS ON SALE
Electrode holder 600A threaded
- 600 A
- threaded
- max. Electrode Ø: 6.30
- cable section: 95mm2
Electrode holder 400 A EHO
- 400 A EHO
- spring
- max. Electrode Ø: 5.00
- cable cross-section: 50mm2
- suitable for long-term operation with strong currents
Electrode holder 600A threaded
- 600 A SIGMAT
- spring
- max. Electrode Ø: 6.30
- cable section: 70mm2
Electrode holder 400A
- 400 A
- springybr />- max. Electrode Ø: 5.00br />- cable section: 50mm2
Electrode holder 400A threaded
- 400 A
- threaded
- max. Electrode Ø: 5.00
- cable section: 70mm2
Electrode holder 200A threaded
- 200 A
- threaded
- max. Electrode Ø: 3.25br />- cable section: 25mm2
Electrode holder 600 A EHO
- 600 A ECHO
- springybr />- max. Electrode Ø: 6.30br />- cable section: 70mm2
- suitable for long-term work with strong currents
Electrode holder 300A
- 300 A
- springybr />- max. Ø electrodes: 4.00br />- cable section: 50mm2
There are two basic types of electrode holders: insulated and non-insulated. Non-insulated are not recommended as they are susceptible to accidental short circuiting during welding. Electrode holders are made in different sizes, and manufacturers have their own marking system. Each holder is designed for use in a specific range of electrode diameters and welding current. When welding with a 300-ampere machine, you need stronger electrode holders than when welding with a 100-ampere machine.
