Vertical grippers with fuse/h1>

Horizontal lifting.
It is especially suitable for transporting
individual plates with a minimum thickness of
approx. 5 mm, as well as for bundles of plates.
The angle from the vertical must not exceed 45°

For lifting pipes of material up to
fi 600mm. With additional protective
coatings,
materials with sensitive surfaces can be lifted.
When using protective coatings,
it is important that the surfaces are dry,
clean and without oil and fat.

Capacity 500 - 3000kg
This gripper is primarily used for
transferring one steel plate in a vertical
position and lifting and turning it 180 °.
This gripper can also be used for
transportation of steel structures and profiles.

Load capacity: 500 - 7500 kg
Suitable for horizontal transport of supports,
metal plates, profiles. The special grip
gripper ensures that the carrier will be almost
horizontal during transport.

Suitable for lifting, turning
and transporting plates with a sensitive surface.
The surface of the panels must be free of oil, grease or
any other liquid to ensure
safe transport.

Load capacity 1000 - 3000 kg
Can be used for safe handling of the plate at
different angles. Possibility of raising the plate in
horizontal position and lowering it in vertical position.
TBS handle is suitable for lifting and turning
welded constructions.

Load capacity 500 - 10000 kg.
For lifting coils of wire,
rings and similar objects.

Load capacity: 750 - 3000 kg
Suitable for vertical transport, especially
for lifting and stacking carriers.
A special system holds the carrier in an almost vertical
position during transport.

Capacity 4000 - 30000kg
This gripper is primarily used to transfer
one steel plate in a vertical position, and
lifting and turning by 180 °. It can also
be used for transporting steel structures and profiles.

For rolls and pipes up to 1050 mm. In addition to pipes and
rolls, this model is suitable for lifting rolls of
paper, fabrics, sheets and pipes. Model TR
can be ordered with a protective cover
made of Bremsit ® or hard rubber for
additional protection lifting loads with sensitive
surfaces.

Load capacity 500 - 3000 kg
It is intended for the transport of supports, steel
profiles, etc.
Gripper Model TPR has a large jaw, which
is useful for different profile widths.

Load capacity 2,000 to 10,000 kg
Pipe lifting hooks are used in
pairs for safe pipe transport.
Shackles are included with the hooks. Pipe
hooks are used in pairs for safe
pipe transport.