BÖHLER S-Al Mg 4.5 Mn ZrTIG rod, Aluminium03/2014www.voestalpine.com/weldingAll information provided is based upon careful investigation and intensive research. However, we do not assume any liability for correctness and information is subject to change without notice.ClassificationsEN ISO 18273AWS A5.10S Al 5087 (AlMg4.5MnZr)ER5087 Characteristics and typical fields of application Zirconium micro-alloyed aluminium TIG rod. The weld metal is uncritical in terms of hot cracks. Suitable especially for complicated welding constructions with critical tensions. Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mmBase materialsAlMg 4.5 Mn3.3547EN AW-5083 [AlMg 4.5 Mn 0.7]AlMg 4 Mn3.3545EN AW-5086 [AlMg 4]AlMg 53.3555EN AW-5019 [AlMg 5]AlMgSi 0.53.3206EN AW-6060 [AlMgSi]AlMgSi 0.73.3210EN AW-6005A [AlSiMg(A)]AlMgSi 13.2315EN AW-6082 [AlSi 1 MgMn]AlMg 1 SiCu3.3211EN AW-6061 [AlMg 1 SiCu]AlZn 4.5 Mg 13.4335EN AW-7020 [AlZn 4.5 Mg 1]G-AlMg 53.3561EN AC-51300 G-AlMg 5 Si3.3261EN AC-51400 Typical analysis of solid wire (wt.-%)Al MnCr MgZr Ti wt.-% bal.0.7 – 1.10.05 – 0.254.5 – 5.20.1 – 0.2< 0.15 Mechanical properties of all-weld metalConditionYield strengthRp0.2 Tensile strength RmElongation A (L0=5d0) MPaMPa% u ≥ 140≥ 185≥ 18 u untreated, as welded Operating dataPolarity: ACShielding gases: (EN ISO 14175)I1 Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mmø (mm)1.62.02.43.0Approvals DB (61.014.06), CE