ESAB

Uz poslovanje u velikom broju zemalja, ESAB je svjetski lider u proizvodnji dodatnih materijala za zavarivanje i zavarivačke opreme. Brand ESAB je sinonim za vodećeg svjetskog stručnjaka u sljedećim ključnim područjima:

  • Ručno zavarivanje i rezanje, oprema
  • Materijali za zavarivanje
  • Automatizacije zavarivanja
  • Sistemi za rezanje

Za svaku disciplinu, kontinuirani razvoj metoda, materijala i know-how je usmjeren u susret izazovima i različitim industrijskim sektorima. ESAB je organiziran za provedbu učinkovite, visoke produktivnosti i rješenja kako bi se zadovoljile njihove potrebe na način koji premašuje njihova očekivanja.

Klijenti ESAB-a nalaze se u sljedećim djelatnostima:

  • Automobilska industrija
  • Čelične konstrukcije i građevinarstvo
  • Cjevovodi
  • linije za proizvodnju cijevi i cijevnih sistema
  • Energetika
  • Procesna industrija
  • Popravak i održavanje,reparaturna zavarivanja
  • Brodogradnja i offshore
  • Transportna i mobilna oprema

ESAB grupa je u vlasništvu Colfax Corporation. U 2010, zaposleno je više od 8400 osoba širom svijeta.

Više od 100 godina nakon što je tvrtka osnovana, ESAB služi globalnom tržištu. Grupa je organizirana u regijama Europe, Sjevernoj Americi, Južnoj Americi, Aziji / Pacifiku i Indije.

ESAB je zastupljen u gotovo svakoj zemlji od strane podružnice ili zastupnika. Prodaja i podrška je uspostavljena u 80 zemalja i ima 26 proizvodnih pogona na četiri kontinenta.

ELEKTRODA ESAB INOX OK...

ELEKTRODA ESAB INOX OK 61.30 FI 1,6

Cijena Send an inquiry

Elektroda za zavarivanje čelika tipa 19 Cr 10 Ni. Također je pogodna za zavarivanje  nehrđajućih čelika sličnog sastava kada je radna temperatura maksimalno 350 ° C.

Typical Tensile Properties

ISO
Condition Elongation Tensile Strength Yield Strength
As Welded 45 % 580 MPa 430 MPa
AWS
Condition Elongation Tensile Strength Yield Strength
As Welded - - -

Charpy V-Notch Properties

ISO
Condition Impact Value Testing Temperature
As Welded 70 J 20 °C
As Welded 49 J -60 °C

Weld Metal Analysis

weld metal analysis
Mn C Si Ferrite FN Ni N Cr
0.7 % 0.03 % 0.9 % 5 % 10.0 % 0.09 % 19.3 %

Approvals: ABS; Stainless; CE; EN 13479; CWB; CSA W48: E308L-17; DB; 30.039.02; DNV-GL; VL 308 L; NAKS/HAKC; 2.0-4.0 mm; Seproz; UNA 272580; VdTÜV; 00792
Classifications: EN ISO 3581-A; E 19 9 L R 1 2; SFA/AWS A5.4; E308L-17; CSA W48; E308L-17; Werkstoffnummer; 1.4316

Approvals are based on factory location. Please contact ESAB for more information.

Alloy Type: Austenitic CrNi
Coating Type: Acid Rutile
Ferrite Content: FN 3-10
Welding Current: DC+, AC
Elektroda ESAB OK 43.32 fi 2,0

Elektroda ESAB OK 43.32 fi 2,0

Cijena 7,46 € / 1 KG (56.21 HRK)

Standardna rutilna elektroda. Stabilni luk, čak i pri malim strujama zavarivanja čini elektrodu vrlo pogodnom za zavarivanje lima.

Typical Tensile Properties

ISO
Condition Elongation Tensile Strength Yield Strength
As Welded 27 % 520 MPa 460 MPa
AWS
Condition Elongation Tensile Strength Yield Strength
As Welded - - -

Charpy V-Notch Properties

ISO
Condition Impact Value Testing Temperature
As Welded 60 J 0 °C
As Welded 55 J -10 °C

Weld Metal Analysis

weld metal analysis
Mn C Si
0.5 % 0.07 % 0.4 %

Approvals: ABS; 2; BV; 2; CE; EN 13479; DB; 10.039.36; DNV-GL; 2; LR; 2; RS; 2; VdTÜV; 00621
Classifications: SFA/AWS A5.1; E6013; EN ISO 2560-A; E 42 0 RR 12

Approvals are based on factory location. Please contact ESAB for more information.

Alloy Type: Carbon Manganese
Coating Type: IMPERIAL_Rutile thick covering
Welding Current: AC, DC+-
ŽICA ESAB OK TIGROD 13.09...

ŽICA ESAB OK TIGROD 13.09 FI 2,0

Cijena 6,10 € / 1 KG (45.96 HRK)

0,5 % Mo legirana žica , za kotlovske materijale.

Typical Tensile Properties

AWS Ar (I1)
Condition Elongation Tensile Strength Yield Strength
PWHT 28 % 610 MPa 510 MPa
As Welded 27 % 620 MPa 520 MPa
EN Ar (I1)
Condition Elongation Tensile Strength Yield Strength
PWHT 31 % 550 MPa 450 MPa
As Welded 30 % 600 MPa 490 MPa

Charpy V-Notch Properties

AWS Ar (I1)
Condition Impact Value Test Condition Temp Test Condition Time Testing Temperature
PWHT 220 J 620 1 -20 °C
As Welded 150 J - - -29 °C
As Welded 130 J - - -46 °C
EN Ar (I1)
Condition Impact Value Test Condition Temp Test Condition Time Testing Temperature
PWHT 190 J 620 1 20 °C
PWHT 170 J 620 1 -20 °C
As Welded 180 J - - 20 °C
As Welded 160 J - - -20 °C
As Welded 90 J - - -40 °C
As Welded 25 J - - -60 °C

Weld Metal Analysis

wire composition
Mn Mo C Si Ni Cr
1.09 % 0.45 % 0.094 % 0.61 % 0.05 % 0.05 %

Approvals: CE; EN 13479; DB; 42.039.08; DNV-GL; III YMS (I1); NAKS/HAKC; 2.0MM-3.2MM; VdTÜV; 04950
Classifications: EN ISO 636-A; W 46 2 W2Mo; Weld Metal; EN ISO 636-A; W2Mo; Wire Electrode; EN ISO 21952-A; W MoSi; Wire Electrode; EN ISO 21952-B; W 52 1M3; Wire Electrode; SFA/AWS A5.28; ER70S-A1 (ER80S-G); Wire Electrode

Approvals are based on factory location. Please contact ESAB for more information.

Alloy Type: Low alloyed steel (0.5 % Mo)
Elektroda ESAB OK 46.00 fi...

Elektroda ESAB OK 46.00 fi 4,0

Cijena 2,97 € / 1 KG (22.38 HRK)

Standardna rutilna elektroda.

Typical Tensile Properties

ISO
Condition Elongation Tensile Strength Yield Strength
As Welded 28 % 510 MPa 400 MPa
AWS
Condition Elongation Tensile Strength Yield Strength
As Welded - - -

Charpy V-Notch Properties

ISO
Condition Impact Value Testing Temperature
As Welded 70 J 0 °C

Weld Metal Analysis

weld metal analysis
Mn C Si
0.42 % 0.08 % 0.30 %

Approvals: ABS; 2; PL,SF; BV; 2; PL,SF; CE; EN 13479; SB,SF,SA,PL,HG; DB; 10.039.05; HG,PL,SA,SF; DNV; 2; PL,SF; GL; 2; PL,SF; LR; 2; PL,SF; RS; 2; HG,SA; VdTÜV; 00623; HG,PL,SA,SF; BKI; 2; PL; ClassNK; KMW2; PL; NAKS/HAKC; 2.5, 3.0, 4.0, 5.0 mm; HG, SA; NAKS/HAKC; 3.0-4.0 mm; PN,MI; NAKS/HAKC; 3.2-4.0 mm; SF; RRR; 2
Classifications: SFA/AWS A5.1; E6013; EN ISO 2560-A; E 38 0 RC 11; GOST 9467-75; E46; GOST R ISO 2560-A; E 38 0 RC 11

Approvals are based on factory location. Please contact ESAB for more information.

Alloy Type: Carbon Manganese
Coating Type: IMPERIAL_Rutile-cellulosic covering
Welding Current: AC, DC+-
Prašak ESAB OK FLUX 10.72

Prašak ESAB OK FLUX 10.72

Cijena Send an inquiry

OK Flux 10.72 je dizajniran za proizvodnju vjetroelektrana. Zadovoljava potrebe višeslojnog zavarivanja debelim slojem, koristeći visoke stope taloženja sa značajnom  žilavosti do -50 ° C u kombinaciji sa standardnom nelegiranom žicom. Koristi se za jednostruke i višežične postupke. Jednako dobro djeluje pri istosmjernoj i izmjeničnoj struji.  OK Flux 10.72 može se primijeniti pri bilo kojoj debljini ploča. U proizvodnji vjetroelektrana uobičajene su debljine ploča od 50 mm i više, uglavnom zavarene Y-spojevima. Bitno je da se šljaka prilikom prvog pokretanja lako uklanja.  Ovaj izvrsni prašak se također može koristiti u drugim tržišnim segmentima sa sličnim zahtjevima zavarivanja, npr. posude pod tlakom i pri općim poslovima zavarivanja u građevinarstvu.


Classifications

AWS - As Welded AWS - PWHT AWS/EN EN - As Welded Wire
A5.23: F8A8-ENi2-Ni2 A5.23: F7P8-ENi2-Ni2 A5.23:ENi2/ 14171-A:S2Ni2 14171-A: S 46 6 AB S2Ni2 OK Autrod 13.27
A5.23: F8TA8-EA2TiB - A5.23:EA2TiB/ 14171-A:S2MoTiB - OK Autrod 13.64
A5.17: F7A8-EM12 A5.17: F6P8-EM12 A5.17:EM12/ 14171-A:S2 14171-A: S 38 5 AB S2 OK Autrod 12.20
A5.23: F8A5-EA2-A3 A5.23: F8P5-EA2-A3 A5.23:EA2/ 14171-A:S2Mo; 24598-A:S S Mo 14171-A: S 46 3 AB S2Mo OK Autrod 12.24
A5.17: F7A8-EM12K A5.17: F6P8-EM12K A5.17:EM12K/ 14171-A:S2Si 14171-A: S 38 5 AB S2Si OK Autrod 12.22

Flux Consumption

Amps Dimensions kg Flux / kg Wire DC+ Travel speed Volts kg Flux / kg Wire AC
580 A Ø 4.0 mm 0.7 kg 55 cm/min 26 V -
580 A Ø 4.0 mm - 55 cm/min 26 V 0.6 kg
580 A Ø 4.0 mm 1.0 kg 55 cm/min 30 V -
580 A Ø 4.0 mm - 55 cm/min 30 V 0.9 kg
580 A Ø 4.0 mm 1.3 kg 55 cm/min 34 V -
580 A Ø 4.0 mm - 55 cm/min 34 V 1.2 kg
580 A Ø 4.0 mm 1.6 kg 55 cm/min 38 V -
580 A Ø 4.0 mm - 55 cm/min 38 V 1.4 kg

Typical Mechanical Properties

Charpy V-Notch Charpy V-Notch Testing Temp Condition Elongation Tensile Strength Wire Yield Strength
100 J -40 °C As Welded 30 % 610 MPa OK Autrod 13.27 490 MPa
80 J -51 °C As Welded 30 % 610 MPa OK Autrod 13.27 490 MPa
50 J -62 °C As Welded 30 % 610 MPa OK Autrod 13.27 490 MPa
50 J -62 °C As Welded 27 % 660 MPa OK Autrod 13.64 560 MPa
125 J -30 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
100 J -40 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
70 J -50 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
50 J -62 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
60 J -30 °C As Welded 25 % 590 MPa OK Autrod 12.24 500 MPa
40 J -40 °C As Welded 25 % 590 MPa OK Autrod 12.24 500 MPa
35 J -46 °C As Welded 25 % 590 MPa OK Autrod 12.24 500 MPa
120 J -30 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa
100 J -40 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa
70 J -50 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa
50 J -62 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa

Weld Metal Analysis

chemical composition
CaO+MgO SiO2+TiO2 CaF2 Al2O3+MnO
25 % 20 % 20 % 30 %

Approvals: CE; EN 13479; DB; 51.039.12
Classifications: EN ISO 14174; S A AB 1 57 AC H5

Approvals are based on factory location. Please contact ESAB for more information.


Aluminate-basic

Alloy Transfer: No Silicon and moderately Manganese alloying
Basicity Index: nom: 1.9
Density: nom: 1.2 kg/dm3
Diffusible Hydrogen: max 5 ml H/100g weld metal (Redried flux)
Grain Size: 0.315-2.0 mm (9x48 mesh)
Slag Type:
Society Wire
CE OK Autrod 13.27
- OK Autrod 13.64
CE OK Autrod 12.20
DB OK Autrod 12.20
VdTÜV OK Autrod 12.20
CE OK Autrod 12.24
DB OK Autrod 12.24
VdTÜV OK Autrod 12.24
CE OK Autrod 12.22
DB OK Autrod 12.22
VdTÜV OK Autrod 12.22
CWB OK Autrod 12.22
DNV OK Autrod 12.22
GL OK Autrod 12.22