Prašak ESAB OK FLUX 10.72

15476
Proizvođač: ESAB
Jedinična cijena: Pošaljite upit
Cijena pakiranja: 0,00 € (0 HRK)
DOSTUPNO
help_outlinePošaljite upit
Prašak ESAB OK FLUX 10.72

Prašak ESAB OK FLUX 10.72

Slažem se s Pravilima privatnosti .  

Količina
DOSTUPNO

Minimalna količina narudžbenica za proizvod je 25 kg.

Podaci

Materijal
Čelik
Postupak zavarivanja
EPP - žica i prah
Promjer
-

Opis:

OK Flux 10.72 je dizajniran za proizvodnju vjetroelektrana. Zadovoljava potrebe višeslojnog zavarivanja debelim slojem, koristeći visoke stope taloženja sa značajnom  žilavosti do -50 ° C u kombinaciji sa standardnom nelegiranom žicom. Koristi se za jednostruke i višežične postupke. Jednako dobro djeluje pri istosmjernoj i izmjeničnoj struji.  OK Flux 10.72 može se primijeniti pri bilo kojoj debljini ploča. U proizvodnji vjetroelektrana uobičajene su debljine ploča od 50 mm i više, uglavnom zavarene Y-spojevima. Bitno je da se šljaka prilikom prvog pokretanja lako uklanja.  Ovaj izvrsni prašak se također može koristiti u drugim tržišnim segmentima sa sličnim zahtjevima zavarivanja, npr. posude pod tlakom i pri općim poslovima zavarivanja u građevinarstvu.


Classifications

AWS - As Welded AWS - PWHT AWS/EN EN - As Welded Wire
A5.23: F8A8-ENi2-Ni2 A5.23: F7P8-ENi2-Ni2 A5.23:ENi2/ 14171-A:S2Ni2 14171-A: S 46 6 AB S2Ni2 OK Autrod 13.27
A5.23: F8TA8-EA2TiB - A5.23:EA2TiB/ 14171-A:S2MoTiB - OK Autrod 13.64
A5.17: F7A8-EM12 A5.17: F6P8-EM12 A5.17:EM12/ 14171-A:S2 14171-A: S 38 5 AB S2 OK Autrod 12.20
A5.23: F8A5-EA2-A3 A5.23: F8P5-EA2-A3 A5.23:EA2/ 14171-A:S2Mo; 24598-A:S S Mo 14171-A: S 46 3 AB S2Mo OK Autrod 12.24
A5.17: F7A8-EM12K A5.17: F6P8-EM12K A5.17:EM12K/ 14171-A:S2Si 14171-A: S 38 5 AB S2Si OK Autrod 12.22

Flux Consumption

Amps Dimensions kg Flux / kg Wire DC+ Travel speed Volts kg Flux / kg Wire AC
580 A Ø 4.0 mm 0.7 kg 55 cm/min 26 V -
580 A Ø 4.0 mm - 55 cm/min 26 V 0.6 kg
580 A Ø 4.0 mm 1.0 kg 55 cm/min 30 V -
580 A Ø 4.0 mm - 55 cm/min 30 V 0.9 kg
580 A Ø 4.0 mm 1.3 kg 55 cm/min 34 V -
580 A Ø 4.0 mm - 55 cm/min 34 V 1.2 kg
580 A Ø 4.0 mm 1.6 kg 55 cm/min 38 V -
580 A Ø 4.0 mm - 55 cm/min 38 V 1.4 kg

Typical Mechanical Properties

Charpy V-Notch Charpy V-Notch Testing Temp Condition Elongation Tensile Strength Wire Yield Strength
100 J -40 °C As Welded 30 % 610 MPa OK Autrod 13.27 490 MPa
80 J -51 °C As Welded 30 % 610 MPa OK Autrod 13.27 490 MPa
50 J -62 °C As Welded 30 % 610 MPa OK Autrod 13.27 490 MPa
50 J -62 °C As Welded 27 % 660 MPa OK Autrod 13.64 560 MPa
125 J -30 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
100 J -40 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
70 J -50 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
50 J -62 °C As Welded 30 % 500 MPa OK Autrod 12.20 415 MPa
60 J -30 °C As Welded 25 % 590 MPa OK Autrod 12.24 500 MPa
40 J -40 °C As Welded 25 % 590 MPa OK Autrod 12.24 500 MPa
35 J -46 °C As Welded 25 % 590 MPa OK Autrod 12.24 500 MPa
120 J -30 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa
100 J -40 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa
70 J -50 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa
50 J -62 °C As Welded 30 % 500 MPa OK Autrod 12.22 415 MPa

Weld Metal Analysis

chemical composition
CaO+MgO SiO2+TiO2 CaF2 Al2O3+MnO
25 % 20 % 20 % 30 %

Approvals: CE; EN 13479; DB; 51.039.12
Classifications: EN ISO 14174; S A AB 1 57 AC H5

Approvals are based on factory location. Please contact ESAB for more information.


Aluminate-basic

Alloy Transfer: No Silicon and moderately Manganese alloying
Basicity Index: nom: 1.9
Density: nom: 1.2 kg/dm3
Diffusible Hydrogen: max 5 ml H/100g weld metal (Redried flux)
Grain Size: 0.315-2.0 mm (9x48 mesh)
Slag Type:
Society Wire
CE OK Autrod 13.27
- OK Autrod 13.64
CE OK Autrod 12.20
DB OK Autrod 12.20
VdTÜV OK Autrod 12.20
CE OK Autrod 12.24
DB OK Autrod 12.24
VdTÜV OK Autrod 12.24
CE OK Autrod 12.22
DB OK Autrod 12.22
VdTÜV OK Autrod 12.22
CWB OK Autrod 12.22
DNV OK Autrod 12.22
GL OK Autrod 12.22