Union AlMg 4,5 MnTIG rod, Aluminium10/2016www.voestalpine.com/weldingAll information provided is based upon careful investigation and intensive research.However, we do not assume any liability for correctness and information is subject to change without notice.ClassificationsEN ISO 18273-AAWS A5.10S Al 5183 (AlMg4,5Mn0,7(A))ER5183Characteristics and typical fields of applicationTIG-rod for welding of AlMg alloys. The weld metal is resistant against sea water.Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mmBase materialsEN AW-5083 [AlMg4,5Mn0,7]AlMg4,5Mn3.3547EN AW-5086 [AlMg4]AlMg4Mn3.3545EN AW-5019 [AlMg5]AlMg53.3555EN AW-6060 [AlMgSi]AlMgSi0,53.3206EN AW-6005A [AlSiMg(A)]AlMgSi0,73.3210EN AW-6082 [AlSi1MgMn]AlMgSi13.2315EN AW-6061 [AlMg1SiCu]AlMg1SiCu3.3211EN AW-7020 [AlZn4,5Mg1]AlZn4,5Mg3.4335EN AC-51300G-AlMg53.3561EN AC-51400G-AlMg5Si3.3261Typical analysis of TIG-rod (wt.-%)AlMgMnCrTiwt.-%bal.4.3 – 5.20.6 – 1.00.05 – 0.25< 0.15Mechanical properties of all-weld metalYield strengthRp0.2Tensile strengthRmElongation A (L0=5d0)MPaMPa%12527517Operating dataPolarity:ACShielding gases:(EN ISO 14175)I1Marks:3.3548 /AlMg4,5Mnø mm1.62.02.43.24.0ApprovalsTÜV (02196), DB (61.132.03), CE